Unique and Functional
Adopting a detachable asymmetry mesh and three built-in 120mm trio rings ARGB fans, ATHENA M1 provides not only an unique look but also maximum air flow through the case.
To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming lights, with more than 20 lighting effects.
One Click, Sync All
ATHENA M1 supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes you easier to unite your case from chaos to calm.
Power Supply Cover Design
Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the ATHENA M1 to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.
Seamless Tempered Glass
To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.
Light It Up, Speed It Up
A single easy push button, controls the 3 ARGB fans and lights surrounded by I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speeds, whichever suites your cooling needs.
ATHENA M1 Overview
"Beauty and Intelligence"ATHENA M1 is a mid-tower case with asymmetry mesh front panel and three built-in 120mm trio rings ARGB fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved.
- Asymmetry Mesh Design
- 3 Built-in 120mm Trio Rings ARGB Fans
- I/O Front Panel With ARGB Streaming Lighting
- ARGB Sync Via Motherboard
- Power Cover Design
- Magnetic Dust Filter
- Seamless Tempered Glass Window
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
- Selectable High/Mid/Low Fan Speed
|Product Name||ATHENA M1|
|Case Type||MID Tower|
|Motherboard Support||ATX, Micro-ATX, Mini-ITX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||Top: 280 mm
Front: 360 mm, 280 mm
Rear: 120 mm
|Fan Support||Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm , 2 x 200mm
Rear: 1 x 120mm, 1 x 140mm
Bottom: 2 x 120mm
|Pre-installed Fans||Front: 3 x 120mm Trio Rings ARGB Fans
(The specification might be different for Brasil market)
|Drive Bays||2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage)
1 x 2.5"
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED control x1, Fan Speed control x1|
|Clearance||CPU cooler height limitation: 170mm
VGA length limitation: 330mm
PSU length limitation: 170mm
|Dimension(LxWxH)||410 x 215 x 485 mm|
|Net Weight||6.8 kg / 15 lb|